4. With the edge trim in place, lay out tiles around sink or other fixtures that will need to be compensated for. Cut tiles as needed.
">1. Begin your layout from the front center of the counter. Lay out a row of edge trim tiles from the center point to the wall or corner to the left or right. If a gap remains at the end of the row that is less than 1/2 a tile, adjust your center point 1/2 tile in either direction to avoid small cuts. A corner should start with a whole tile, so make your adjustment on the opposite end.
2. Keeping the edge trim pieces in place, lay a row of tile from the center point or inner corner out to the wall or corner.
3. Lay out a row of tile from the center point back along the center line. This will create an "L" shape that you will fill with the same pattern all the way into the corner.
4. With the edge trim in place, lay out tiles around sink or other fixtures that will need to be compensated for. Cut tiles as needed.
copyright 2002 mobile
ceramics ltd. All rights reserved. | terms and conditionsI
